Suspension Fabrics
Suspension Fabrics (11)
Dymetrol® high-performance fabrics provide strong, stretchable suspension materials for today's demanding auto, aircraft, and furniture seating.
Wednesday, 26 October 2011 12:20
AM203 Dymetrol
This specification describes a white (not color matched) five harness sateen weave material which is used as a seating support material. Also known as C100SW FR Dymetrol.
Additional Info
- Color White
- Width - Full As per Acme Mills' Purchase Order Requirements + 1.00
- Width - Slit As per Acme Mills' Purchase Order Requirements + 1.00
- Composition Warp Spun polyester, 12.3' singles
- Composition Fill Hytrel yarns, 14.5 mils diameter
- Construction Warp 100+/- 4 ends per inch
- Construction Fill 14 +/- 1 pick per inch
- Weave --
- Weight 8.35 oz/yd2 minimum (283 g/m2 minimum)
- Tensile Strength (Grab) - Warp 210 lbs (934N) per inch minimum
- Tensile Strength (Grab) - Fill 50 lbs (222N) per inch minimum
- Tear Strength - Warp (Trapezoid Method) --
- Tear Strength - Fill (Trapezoid Method) --
- Dimensional Stability - Warp --
- Dimensional Stability - Fill --
- Dye Stability --
- Odor - Wet & Dry --
- Elongation @ Break - Warp 16% minimum
- Elongation @ Break - Fill 50% minimum
- Bond Strength 14 lbs (62N) minimum
- Bow 1.0
- Skew 2.0
- Spring Weight 0.68 / 0.92 lbs (3.02 / 4.09N) per inch
- Flammability 4 inches per minute maximum
- Set Warp/Fill
- Stiffness Warp/Fill
- Acme Part Number 203-129
- Mill Style 6730-30S
Published in
Suspension Fabrics
Tagged under
Wednesday, 26 October 2011 12:20
AM203B Dymetrol
This specification describes a white (not color matched) five harness sateen weave material which is used as a seating support material. Also known as C100SW Dymetrol.
Additional Info
- Composition Warp
- Composition Fill
- Construction Warp
- Construction Fill
- Elongation @ Break - Warp
- Elongation @ Break - Fill
- Bond Strength
- Bow
- Skew
- Spring Rate
Published in
Suspension Fabrics
Tagged under
Wednesday, 26 October 2011 12:20
AM204 Dymetrol
This specification describes white (not color matched) five harness sateen weave material which is useable as a seating support material. It is also known as C125SW FR Dymetrol.
Additional Info
- Composition Warp
- Composition Fill
- Construction Warp
- Construction Fill
- Elongation @ Break - Warp
- Elongation @ Break - Fill
- Bond Strength
- Bow
- Skew
- Spring Rate
Published in
Suspension Fabrics
Wednesday, 26 October 2011 12:20
AM204B Dymetrol
This specification describes white (not color matched) five harness sateen weave material which is useable as a seating support material. It is also known as C125SW Dymetrol.
Additional Info
- Composition Warp
- Composition Fill
- Construction Warp
- Construction Fill
- Elongation @ Break - Warp
- Elongation @ Break - Fill
- Bond Strength
- Bow
- Skew
- Spring Rate
Published in
Suspension Fabrics
Tagged under
Wednesday, 26 October 2011 12:20
AM204C Dymetrol
This specification describes five harness sateen weave material, dyed black, which is usable as a seating support material. Also known as C125 SC Dymetrol.
Additional Info
- Color Black
- Width - Full As per Acme Mills' Purchase Order Requirements + 1.00
- Width - Slit As per Acme Mills' Purchase Order Requirements +/- 1/16
- Composition Warp Spun polyester, 12.3' singles
- Composition Fill Hytrel yarns, 14.5 mils diameter
- Construction Warp 100+/- 4 ends per inch
- Construction Fill 17 +/- pick per inch
- Weave --
- Weight 9.00 oz/yd2 minimum (305 g/m2)
- Tensile Strength (Grab) - Warp 210 lbs per inch minimum
- Tensile Strength (Grab) - Fill 60 lbs per inch minimum
- Tear Strength - Warp (Trapezoid Method) --
- Tear Strength - Fill (Trapezoid Method) --
- Dimensional Stability - Warp --
- Dimensional Stability - Fill --
- Dye Stability --
- Odor - Wet & Dry --
- Elongation @ Break - Warp 16% minimum
- Elongation @ Break - Fill 50% minimum
- Bond Strength 15 lbs minimum
- Bow 1.0
- Skew 2.0
- Spring Weight 1.00 +/- 0.15 lbs. per inch - Fill Direction Only
- Flammability --
- Set Warp/Fill
- Stiffness Warp/Fill
- Acme Part Number 204-219
- Mill Style 6731-30H
Published in
Suspension Fabrics
Wednesday, 26 October 2011 12:20
AM205 Dymetrol
This specification describes a white (not color matched) five harness sateen weave material which is useable as a seating support material. It is also known as C150SW FR Dymetrol.
Additional Info
- Color White
- Width - Full As per Acme Mills' Purchase Order Requirements + 1.00
- Width - Slit As per Acme Mills' Purchase Order Requirements + 1.00
- Composition Warp Spun polyester, 12.3' singles
- Composition Fill Hytrel yarns, 14.5 mils diameter
- Construction Warp 100+/- 4 ends per inch
- Construction Fill 21 +/- 1 pick per inch
- Weave --
- Weight 9.95 oz/yd2 minimum (337 g/m2 min)
- Tensile Strength (Grab) - Warp 210 lbs (937N) per inch minimum
- Tensile Strength (Grab) - Fill 80 lbs (356N) per inch minimum
- Tear Strength - Warp (Trapezoid Method) --
- Tear Strength - Fill (Trapezoid Method) --
- Dimensional Stability - Warp --
- Dimensional Stability - Fill --
- Dye Stability --
- Odor - Wet & Dry --
- Elongation @ Break - Warp 16% minimum
- Elongation @ Break - Fill 50% minimum
- Bond Strength 16 lbs. (71.1N) minimum
- Bow 1.0
- Skew 2.0
- Spring Weight 1.0 / 1.4 lbs (4.4 / 6.2N) per inch
- Flammability 4 inches per minute maximum
- Set Warp/Fill
- Stiffness Warp/Fill
- Acme Part Number 205-129
- Mill Style 6732-30S
Published in
Suspension Fabrics
Wednesday, 26 October 2011 12:20
AM205B Dymetrol
This specification describes a five harness white (not color matched) sateen weave material which is useable as a seatcing support material. It is also know as C150SW Dymetrol.
Additional Info
- Color White
- Width - Full As per Acme Mills' Purchase Order Requirements + 1.00
- Width - Slit As per Acme Mills' Purchase Order Requirements +/- 0.625
- Composition Warp Spun polyester, 12.3' singles
- Composition Fill Hytrel yarns, 14.5 mils diameter
- Construction Warp 100+/- 4 ends per inch
- Construction Fill 21 +/- 1 pick per inch
- Weave --
- Weight 9.25 oz/yd2 (313.6 g/m2) minimum
- Tensile Strength (Grab) - Warp 210 lbs (934N) per inch minimum
- Tensile Strength (Grab) - Fill 80 lbs (356N) per inch minimum
- Tear Strength - Warp (Trapezoid Method) --
- Tear Strength - Fill (Trapezoid Method) --
- Dimensional Stability - Warp --
- Dimensional Stability - Fill --
- Dye Stability --
- Odor - Wet & Dry --
- Elongation @ Break - Warp 16% minimum
- Elongation @ Break - Fill 50% minimum
- Bond Strength 16 lbs. (71.1N) minimum
- Bow 1.0
- Skew 2.0
- Spring Weight 1.0 / 1.4 lbs (4.4 / 6.2N) per inch
- Flammability --
- Set Warp/Fill
- Stiffness Warp/Fill
- Acme Part Number 205-000
- Mill Style 6732-30H
Published in
Suspension Fabrics
Wednesday, 26 October 2011 12:20
AM205C Dymetrol
The specification describes five harness sateen weave material, dyed black, which is useable as a seating support material. It is also known as C150 SC Dymetrol
Additional Info
- Color Charcoal
- Width - Full Full, + 1.00”, -0.00”
- Width - Slit Slit, ± 1/16” (0.0625)
- Composition Warp Spun polyester, 12.3' singles
- Composition Fill Hytrel yarns, 14.5 mils diameter
- Construction Warp 100+/- 4 ends per inch
- Construction Fill 21 + /- 1.0 picks per inch
- Weave --
- Weight 9.25 oz/yd2 (313.6 g/m2) minimum
- Tensile Strength (Grab) - Warp 210 lbs (934 N) per in. minimum
- Tensile Strength (Grab) - Fill 80 lbs (355 N) per inch minimum
- Tear Strength - Warp (Trapezoid Method) --
- Tear Strength - Fill (Trapezoid Method) --
- Dimensional Stability - Warp --
- Dimensional Stability - Fill --
- Dye Stability --
- Odor - Wet & Dry --
- Elongation @ Break - Warp 16 % minimum
- Elongation @ Break - Fill 50 % minimum
- Bond Strength 16 lbs (71 N) minimum
- Bow 1.0 in. maximum per 82”
- Skew 2.0 in. maximum per 82”
- Spring Weight 1.00 / 1.40 lbs (4.4 / 6.23) per inch (Fill direction only)
- Flammability --
- Set Warp/Fill
- Stiffness Warp/Fill
- Acme Part Number --
- Mill Style --
Published in
Suspension Fabrics
Wednesday, 26 October 2011 12:20
AM205E Dymetrol
The specification describes five harness sateen weave material, dyed black, which is useable as a seating support material. It is also known as C150SC Dymetrol.
Additional Info
- Color Black
- Width - Full As per Acme Mills' Purchase Order Requirements + 1.00
- Width - Slit As per Acme Mills' Purchase Order Requirements + 1.00
- Composition Warp Spun polyester, 12.3' singles
- Composition Fill Hytrel yarns, 14.5 mils diameter
- Construction Warp 100+/- 4 ends per inch
- Construction Fill 21 +/- 0.5 picks / inch
- Weave --
- Weight 9.95 oz/yd2 minimum (337 g/m2 min)
- Tensile Strength (Grab) - Warp 210 lbs per inch minimum
- Tensile Strength (Grab) - Fill 80 lbs (356N) per inch minimum
- Tear Strength - Warp (Trapezoid Method) --
- Tear Strength - Fill (Trapezoid Method) --
- Dimensional Stability - Warp --
- Dimensional Stability - Fill --
- Dye Stability --
- Odor - Wet & Dry --
- Elongation @ Break - Warp 16% minimum
- Elongation @ Break - Fill 50% minimum
- Bond Strength 16 lbs. (71.1N) minimum
- Bow 1.0
- Skew 2.0
- Spring Weight 1.20 4 +/- 0.20 lbs / inch (Fill Direction Only)
- Flammability 4 inches per minute maximum
- Set Warp/Fill
- Stiffness Warp/Fill
- Acme Part Number 205-209
- Mill Style 6732-1 (30S)
Published in
Suspension Fabrics
Wednesday, 26 October 2011 12:20
AM206 Dymetrol
This specification describes a white (not color matched) five harness sateen weave material which is useable as a seating support material. It is also known as C200SW FR Dymetrol.
Additional Info
- Composition Warp
- Composition Fill
- Construction Warp
- Construction Fill
- Elongation @ Break - Warp
- Elongation @ Break - Fill
- Bond Strength
- Bow
- Skew
- Spring Rate
Published in
Suspension Fabrics
